Click image to view full size image
Hook Strip Flat Shale ShakerScreen
Hook strip flat screen are the series applied most widely at present. These products can be fit for all kinds of shale shakers that use the hookstrip flat screen. This screen panel is constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be inserted to the rips or tears of the screen. By doing this, we can cut down time and the production cost. We can supply hookstrip flat screens with mesh sizes ranging from 12 to 275.
Features of HOOK STRIPE FLAT PLATE SCREEN
ⅠDifferent layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better. Screen with different mesh counts with suitable opening sizes of the backing plate. Doing so, our products will obtain the largest effective area under the condition of enough strength.
ⅡThe bottom layer with low mesh counts has coarse wire and can be tight bonded to the backing to make up one block. So the strength of whole screen mesh get up and the useful life is increased
| Screen Model | Pange of Mesh | Dimension(Length×Width) | Brand & Model OF Shaker | Weight(Kg) |
| GKA-1 | 16-325 | 903×1155mm | SWACO BEW-3 | 5.6 |
| GKA-2 | 16-325 | 1212×1141mm | SWACO ALS-11 | 9 |
| GKA-3(PWP) | 16-325 | 697×1050mm | DERRICR FLC500 Series | 6 |
| GKA-4(PWP) | 16-325 | 697×1053mm | DERRICR FLC2000 | 4.2 |
| GKA-5 | 16-325 | 697×846mm | DERRICR FLC313M | 4 |
| GKA-6(PWP) | 16-325 | 915×1150mm | BRANDT LCM-20 | 8.6 |
| GKA-7(PWP) | 16-325 | 720×1220mm | KEMTRON KTL48 Series | 5.6 |
| GKA-8(PWP) | 16-250 | 700×1165mm | S250 | 4.6 |
| GKA-9(PWP) | 16-250 | 1186×1280mm | ZX60 | 9.2 |
Remarks: All the types above can be produced.
Annie Lu
Huatao Shale Shaker Screen Factory
Tel: +86 0311 80690567
Fax: +86 0311 85866720
Hook Strip Flat Shale ShakerScreen
